CM-108 USB SoundCard as an interface for SVXLink.
This CM108 Model has the capability of modification to permit the PTT to be operated via certain commands already available within the SVXLink software. The components required are a 10K…
Amateur Radio Station
This CM108 Model has the capability of modification to permit the PTT to be operated via certain commands already available within the SVXLink software. The components required are a 10K…
Direwolf: In the early days of Amateur Packet Radio, it was necessary to use an expensive “Terminal Node Controller” (TNC) with specialized hardware. Those days are gone. You can now…
I am seeing and reading about a lot of issues about how to listen to DMR as a mode, and how to use it, and what to do with it.…
svxlink_raspberry Script build for Raspberry Pi – Repeater or Hotspot with connection to SVXPortal-UK. This package is for those who wish to construct an FM hotspot or Repeater with options…
I am prompted to write a few lines owing to the state of some of the number of code-plugs I have seen recently. I have all the CPS software and…
Protocol 2 of the SVXReflector is available in the latest edition of SVXLink from the Github. It is not backwards compatible with the Protocol 1, so those running an image…
This is the UK portal for SVXlink nodes and repeaters that currently subscribe to the network. It may appear confusing but I will attempt to describe what is taking place…
By now you will have read my previous post. This is an update to the experiments. The Raspberry Pi Zero has some great advantages, in that its footprint is small…
Gabriel Huang BV5DJ has produced a remarkable device, giving the possibility of further enhancing the use of SVXLink and its associated modules. The DJSpot is a combination package of Raspberry…
When constructing a simplex node or a repeater, your hardware can be very simple. Naturally the most expensive items will be transceivers, and those should be capable of producing ‘flat’audio,…
British English en_GB.tar.gz – http://192.168.1.189/wp-content/uploads/2021/07/en_GB.tar.gz These files are for installation in Raspberry Pi SVXLink compilations. There are over 400 Voice samples and phrases ready to use. In SSH after compilation…
I was asked by the sysop Seamus G7ITT to assist in setting up GB3EV with a new type of Raspberry Pi Hat, actually designed and made in France, using the…